Slogging through drizel
Aero out again – wanted the warmth and comfort to an Alpine meeting.
No one else brought their cars and there was nothing worth a pic in the car park either.
Aero out again – wanted the warmth and comfort to an Alpine meeting.
No one else brought their cars and there was nothing worth a pic in the car park either.
Started the E-type to see … and yes it’s back on. Cleaned the wire and after a few revs it went out again. Perhaps it need a longer run to bed the bushed in ?
Two Golf Mk7 trips late pm. Nice to drive a new car. Still feels like a treat.
Started the E-Type hoping for the result I wanted, but expecting the result I got. The red ignition warning light was back on.
Looked at the warning light connection on the control box and no fiddling changed anything. However taking the wire off the dynamo and reconnecting it had the desired effect. The light went out.
Ran for a few miles with headlights and wipers on – charged well about 1500 rpm (35 mph) – not sure it’s better than the old dynamo to be honest.
I’ll measure the output and clean up the connections when I can.
Car into bubble for now – a bit dirty though.
Aero and Mk7 had utility runs too in the afternoon.
Fitted the Dynator to the E-type.
Harder than I thought as the new belt seemed fat too short to get the unit in place. The old split belt was fine (stretched ?) and luckily so was the back-up one I had in the boot. The packet said 1010 mm so I’ll look for another one as well as a proper spare.
New one (right) is definitely lighter, but did not work when I first started it up. Red charging light went out after a bit of revving. Like the new electrons needed to flush out the old ones…
The pulley is also now in no danger of hitting the frame.
Rain stopped me doing a test drive so that will have to wait – time will tell if it’s a permanent fix.
Earlier Aero utility run – an no sign of ‘clonking’.