To quote Pink Floyd – That’s a Nice Pair

Uncategorized

Worked on the Imp first thing clamping the loose oil pipes etc. Also noticed they had used a DIY fitting on another pipe so secured that.

While under the dash I spotted the DIY clamp for the new Speedo cable and the poor wiring. Taped up the wiring and now have more parts on order to secure the Speedo cable.

Quite enjoyable to sort the little problems out.

Then washed the car – much quicker than I had expected – but then it is small. Then took pictures of the Imp and the E-type. Some quite nice ones.

Moved the Imp into the brick garage as it’s easier to get in and out – however the E-type is rather large for the wooden one…

Finally when all dry I spent ten mins touching up about 6 stone chips and painted in some other bits  – as it seems to be the same colour.

Another very clean car

Uncategorized

Caterham’s turn to get clean today. The 50mm lens makes it look very good too.

Then run to deliver shopping to Harklstead – I did go the longer way round to avoid the burst water main though.

Finished the models as well.

Two wheels to the sea and cleaning up

Uncategorized

Started the day just after 7:00 with a cycle (my permitted single session of exercise) down to the boat.

The boat looked good – clean and ready to go – oh well. Then cycled back (that seemed quicker) so a total of about 16 miles. On blissfully quiet roads.

Then spent most of the rest of the day cleaning the underside of the Imp.

From mud to paintwork again.

Also ‘fixed’ the number plate holes so it looks better – than it did – as you can see.

But not perfect – and finding a screw to stop the side light rattling.

Model Pottering

Uncategorized

Worked out the rest of the dashboard. Started the Imp before turning the lights on.

Then finished one of the models.

Came out OK I think – I think the red could be a bit lighter but its hard to tell.

Country remains in lock down – so this is as far as I will get. Perhaps I’ll tour New Zealand.

Two on the drive

Uncategorized

I started by replacing the badge again putting the old one back on – yes it looked better.

Then took the Imp out and about – well on the drive – starting from first is easier than reverse, but it was starting to foul the plugs after 15 mins. Took a few pics too with the flash – which showed how dirty it is underneath.

Then made a new liner for the strange small box that fits under the bonnet.

Then E-type for a warn up and photos

Then more on the small Imp model too

Finally spotted water on the drive where the Jaguar had sat … and yes it was wet in the garage. So we’ll have to see where it is coming from.

Badge Engineering

Uncategorized

Sun out and we’re in lock down so mainly a garden day – working on the irrigation and cleaning out the sludge from the 1000 litre water but. Nice.

I did have time to change the badge on the imp though. I put the antique Suffolk one on.

I’m not sure I like it though. The colour clashes – so I might revert.

Pottering and Documenting

Uncategorized

Task 1. Send off the change of taxation class for both the Ferrari and the Imp – so now we wait for four weeks.

Then looked up details on the Imp – confirmed the 14 gallon tank – by looking at the gauge !

Also a generated a long list of jobs.

Then made a cartoon version of the car.

Imp back together

Uncategorized

I spent the whole day working on the Imp to get it back together, improving the odd fitting as I went and generally cleaning and tidying it up.

I also made a vent pipe that will not overflow, tried the tonneau (very snug fit) and put the door retaining straps back on amongst other things.

On and I found where you top up the radiator by accident – it’s the top pf the radiator…

Imp Time

Uncategorized

Spent the day cleaning and fixing bits on the Imp. Nothing that critical, but sticking back trim where it was pealing and filling the holes with wood filler.

I found it impossible to make much of a dent on the dirty leather though. I did not want to change colour with chemicals so I’ll just leave it alone and put a light leather wax on it.

Also cleaned everything under the trim I’m about to put back and added a battery conditioner wire – the battery did not want to go back down so I made the base thinner. That will probably need replacing and the battery looks very exposed. I did add a couple of pads too to stop the fuel pipe and the battery clamp bolt rattling too.

Oh and the dead grass remains a testament to the leak – it’s even got a tail.