Little jaunts

Uncategorized

MK7 ride to Harkstead – and then not a lot of interest.

However I did manage to summon the energy to get the Aston out late – it was sunny and the planet needed saving.

Finally Lee phoned – they are progressing with the Alpine and it’s time I went back to do some more myself next week.

Talbot makes Tracks – and Mr E gets worse

Uncategorized

I started by topping up the water and checking the oil on the Talbot before the run up to see John at Wickham Market. I filled the expansion bottle up about half way and thought that would be a good start. No water in the radiator top though.

No oil was needed – still. Suspicious ? 

Then starting it misbehaved a bit. Turned over but did not fire – then fired on one or two cylinders making a rough sound and finally after a few goes (one clonk) it roared into life. I might have not pumped enough petrol into the carb or pumped too much into the plugs pressing the accelerator too many times.

Or it’s a car from 1933.

After that it was fine but it made me very nervous. I set off though and filled up with petrol again after a few miles. Then I had another look at John’s Vauxhall – he’s working on it to correct a few nicks – still looks huge. We then looked at the Talbot water temperature and it is reading correctly. The shutter seem to open about 95 though which might be a bit late. However we were able to take the pressure cap off and the radiator cap too without gushes of steam etc.

Then we tried Foppe – he was out but John had made me drive down narrow lanes with grass in the middle – not what I wanted. Then we went to see Chris and his Rapier – the top is still looking great. I was told to park outside of the house and got filthy ‘off roading’ on the muddy driveway. I also made a few tracks on the lawn. Looked the part though.

Then off to look at the Tiger – but the garage was shut up. So we went back through the mud again and then I headed home to drop John off. Listening to the thumps as mud came of from the tyres.

A good run home but I noticed the oil gauge move around a bit and it sounded like a rumble at 55 mph but then again I am paranoid.
Home and it was apparent that the car needed a good clean. It took over an hour just to get the mud off from the underneath and the tyres.

In doing so I found that each wing has an inner cover – very modern. Then I gave the car a full clean too. That took another 45 mins but was worth it.

Next I tackled the E-type – I had noticed that the power for the fan seemed to be taken from the brake switch. The red wire. I also noticed there was nothing in the other terminal and a loose wire next to it.

Anyway I rigged up a direct connection to the fan and it still had the same effect on the charging. I also tested the brakes and have no rear break lights – I suspect that wire should have been connected then … another thing to investigate. 
Finally the immobiliser has stopped working again. I also found the ‘clicking’ noise – it was the relay under the dash – it clicked when I pressed the key in the barrel too – WTF ?
Finally I re-attached the cut-off switch and took the Talbot out around the block again in the dying sunshine. Fine run and I’m getting used to it – and it’s noises – I was slightly less apprehensive this time too.

Flash Harry

Uncategorized

SAAB AM into town and parking on the street. Well after failing to get into two other spaces.

Home via Harkstead and the small roads – I must have reversed back 10 times in the end to let traffic past. 
Home eventually and I decided to look at the two Talbots – the model and the real one – as the fittings for the indicators had arrived. Model first and I think I’m on diminishing returns so will probably stop after I put the number plates on. Although I need to paint a stripe down the doors.
Then to the lights. I rigged one up and it worked fine from a battery. Then I went through the small fuse box under the front cover to see which were the indicators. Having established that I tried the bulb. Nothing doing. Odd. I then thought it must need an LED bulb. [I’m not convinced it really did on reflection.]
Anyway off I went to get two. Halfords nope – so eventually Wilco. Here we are in the MK2 getting it started again.

I must get that fixed.

So home again and I built the fittings with the LED bulbs. I glued them both together although the one I had cut down is probably a bit weak. However that worked and the bulbs stuck up higher too.

I was able to screw in the first one quite easily having extended the wires. The second would not go in though. It was also the flimsy one so if course that broke and I re-stuck it – twice in fact. But it would not screw up strait. I then though to cut the side flange off so it was a bit thinned – Bob as they say – was then my Uncle. In it went. So I attached all the wires – tested it and it all works.

Well it made me happy – and it only took six and a half hours too.

So it’s not that then

Uncategorized

Tackled the E-type Dynator in the morning. I guess after swapping it out 7 or eight times I should know how to do it.

In fact I had it done un about 30 mins – including getting the tools etc. That was the easy bit. Out she came for a test drive then.

For a while it was looking good – with normal charging and no problems – and I was feeling happy. Then off it went. I guess when the Kenlow cuts in the charging just goes off the roof again. Now it’s not likely to be happening with two of the same unit so is it the fan ? Switching the fan on and off I get the same symptom, but not with the head lights. So I guess the next thing to do is to change out the fan ? Or possibly the relay first ?

Then a B&Q run in the SAAB full of wood.

The miles ticked over to show 150,000 *.

Finally ‘tinkering’ with the model and a final (I hope) respray.

We’ll see on both counts.
* I only noticed that a few days later though.

Little and Large – Showers and Cars

Uncategorized

The day started with heavy gusty showers sweeping in and across the garden. No classic car opportunities today then. So I looked at the little model. I decided to mask it up and spray it with white and a coat of Ivory again. Not that easy masking up something so small.

Then the sun came out so I got the real Talbot out. It started with no ‘clonks at all after 5 attempts’. 

Only to quickly put it away as the rain started again. Ho Hum. But eventually the big black clouds blew away and off we went to collect James and Miri from the station.

A 1930’s Uber. It did run a little hot but behaved itself well.

Finally in the evening I took the tape off and did a little touch up on the model – I mixed a darker brown and used a grey on the running boards.

 Looking better now, but it is harder than it looks.

A tale of two Tops

Uncategorized

First the run up to Gleveing in the MK2 – started first time. Dreary start to the day but we were early and ready for the task in hand.

I think the grass needs cutting though. So anyway off we went to Norfolk – in a little Peugeot. About an hour and a half later we arrived and gosh – the hood for Chris’ Rapier looked very good indeed.

It matched the brown side stripe perfectly too. Nice blue Lotus Excel in for work next too.

So about an hour later I set off South – the car pottering along nicely. Handing over to Chris half way we drifted back fine – no wind, no booming or flapping, snug and warm.
Then home in a storm and via Nacton Auto Electrics – who found the Talbot [Merc] part first google – odd.
Back in the dry it was a bit of modeling with the cream spray paint.

Then Imp out in the late sunshine. Oddly as I opened the bonnet I spotted the one of the carbs had blown its top and sprayed the oil out.

I’ve never seen that before – so I assume it just vibrated off. Well it is more bumpy and the wheels wobble much more now – I am convinced.
Well since driving the Talbot anyway …
NB further research showed the part the Nacton found was the one I had found too – ‘not in stock’.

It’s no N1GEL – and a Key Story

Uncategorized

First thing I warmed up the 308 and got ready to take it in [at last] for the work it needs to get driving properly again. It started first time… ish, with a few pops and sat there idling roughly for a while.

The drive to Halstead was OK – the odd backfire and a few times it felt like it was dropping onto 6 cylinders. By the end it was settled and on 7.75 again. Parking up I was in good company as usual though.

Inside there was a Diablo on the ramp – minus virtually everything.

Looking at the number plate something looked wrong. The B was in fact an S.

Home in the MK7 and then PM off I went in the SAAB for a Harkstead/Ipswich/Harkstead run.
Then I took my new blank key for the Talbot to get it cut again. MK2 this time running well, but I still had to use the red button to get it started the second time.

When I got home I tried the new key in the door. After a few jiggles it seemed to work well – locked and unlocked the door. Then I tried to open the door. No way – the handle was immoveable. Umm. I tried both keys – no luck. A little panic and annoyance overcame me, but at least the windows were open and the other door not locked. What were were going to do now though ?

Then I noticed that the catch was down inside and I’d locked the handle myself. The key does not effect it. I moved the catch and opened the door. Dho ! But at least the key worked so I’ll not lock myself out.

I then thought I check the other door. There is no lock outside, but also no lock inside – in fact no way to lock that door at all. So why did I bother ?

Finally another little bit on the model – just smoothing the filler and re-painting the undercoat while I await some more paint.

So going back to the Ferrari do I really want to let it go ? Not really.

NB: See Friday 12 March 2010

Big one and Little one

Uncategorized

More bloody rain and an overcast, cold day. AM I went under the Talbot to look for the solenoid serial number. Nice thing about vintage cars – they are high off the ground.

Here it is:

Ah yes the good old Monark 83 809 004. Not sure where I’ll be able to get one of those. 

Then pottered playing with the model. Cutting off the rear to make it a better shape. 

I also gave it a coat of paint too after bending the boot up and filling the gaps.
However I did find that on the real one the light fittings on the indicators are the same thread as garden hoses ! So I set about working out how to fit something. While I was doing that our MP (well the old one) James Cartlidge popped his head in the garage door looking for the letterbox – he got three shocks. 1. When I popped out to meet him, 2. That I knew who he was and 3. when he saw the cars in the garage – a 1933 Talbot and Aston Martin V12 Vantage.

Then I took the Aston out to look for lights and paint – another fail. Rain came down on the way back too – looking at that sky I was not surprised.

Starting !

Uncategorized

So another cold, dull and rainy day. 

Had an early reply from Polson saying ‘I was wrong the thing that looks like a solenoid under the bonnet which you illustrated in your e mail is a solenoid’, so I’m not a complete numpty I thought. However he said the workshop thought the points were sticking in it as it had been left standing so long. Odd I thought as with the recent activity it seems to be getting worse not better …

Anyway, I BB sat AM so lots of brio train action was all we got.

However PM I thought I’d look through the paperwork for clues on the solenoid. I found the reference to the Mercedes unit and lots of wiring diagrams. I also wondered what that Rotax switch was for ?

So I put the key in it – it seems to turn from one side to the other – perhaps moving over the batteries when running ?

Anyway I tried starting with out my foot off the clutch to hear the noise and my jipes it started ! In fact it tried to start each time so I just let her fire up – I’d not even pumped the carb. Ummm – odd.

Of course I tried with the foot on the clutch but that worked too.

Researching again the manual says if there is a Traffic Clutch DON’T put your foot on the clutch. So I assume I do have one.