Month: December 2024
OK (again) but Not Right
So AM watched the SAAB drive away full of Shit again for the allotment, while I cleaned the trailer – now I can use the slab again for work.
Then late PM as it was almost dark I put the VIN plate on. My only dilemma was the orientation. My holes said portrait but all the pictures I could fine were landscape.
I’ll move on and see what happens. Later I thought why not just re-thread them to a bigger size ? So if this does not hold at least I have an alternative path.
I also looked at buying new windscreen wiper arms that fitted better. Researching what other cars had I found this…
I’ve put them back on the wrong way round. Dho ! Not that they ever fitted particularly well.
It’s Behind You
Gosh – the sun was out – so SAAB to the boat for some work. Marina car park was very empty an don such a sunny morning it must be the parking restrictions biting.
However as one of the privileged few we were fine. Nice to see the boat again too.
The sun was still out as we drove back via Harkstead for a quick drop off. So I decided to get the fan heater on the Talbot over lunchtime. There was a bit of oil from the rear axel in the drip tray so before a long run I’ll have to see if I can top it up. The sun was only just peaking out by then but I got the Talbot out and after warming on the drive off we went.
Again – like the Lord of the Manor – a car stopped in the road to let me out. SAAB 95 estate I think. I was snug and warm in it and it drove well, although sounded a but different – mind you the windows were closed and I have a blocked ear !
I need to change the old headlight to the new one and I also need to fill up as we’re nearing 200 miles since the last fill and I’ve really only done short runs.
Just when the air was getting colder and the day was waning away I got a call and an excuse to go for another drive. So with out warming it up first the Alpine came out. Started fine – again that non return valve works well.
Here we are looking splendid with the SAAB behind being used as a muck wagon.
Back again quickly as it was getting a bit cold and I thought I’d do the new vin plate. The stamping was fine.
But I found that I had run out of pop rivets – so they are on order.
I also looked at the holes in the bonnet I need to do something about to fit the catch. Umm.
ION: A study claims that Car production in the UK is declining and has now fallen for eight months in a row. No one wants electric cars and the manufacturers are forced to build EV’s as a higher % of the total – so everything is scaling back.
What Winter ?
Early (well for me it was) start – off to check a water leak at Harkstead.
Stipple Stipple Stipple
Well, cleaning the glass for the Talbot was easy with my ‘clingfilm shield’ in fact I was ready to fit it in an hour.
What do you think ? Yes me too – it still looks darker so I checked the oil (fine), started the car and backed it out for a better look. 95% there.
Sadly it’s defiantly more opaque – not the green hue as before but I suspect a more/deeper ‘stippling’. In the end I decided to leave it for another day (probably the Spring) and swap over the original then and no one will ever know … I think. I must do it before I am in company of those that might know to get a reaction.
Four screws Good – Eight screws Better
The first task was to stick the new headlight in the surround. So as planned I covered the stippled side with cling film to try to stop it getting so contaminated.
Mixed Tasks
AM I decided to re-start on the Talbot light so warmed the garage up while I worked outside.
It came off quite easily – or I was more confident in how it came off – and I cleaned off the old mastic so we were ready for another shot.
But we did need more mastic so after lunch off I went out in the company van to a very busy B&Q – via a very busy John Lewis to drop off the bottles. The only problem was that the garage fob would not work.
By then though Harkstead beckoned with a quick job. So the MK2 was out and about as the gloom came back.
Home again and it was too dreary to do any more work so that was that.
Garage Tidy – and Odd Load
AM I just popped out to the garage to tidy away the Alpine parts, gauges, bolts and tools I’d left out from yesterday. Not a lot else.
PM a Harkstead run for Xmas jobs. Checked the Imp – yes still there.
I’m suffering the problem of it not being here in this warm weather when I might have used it or done some little jobs. Same as the Ferrari which I might have got out.
Anyway – Harkstead jobs done it was home time in the gloom.
Yes that odd load again.
Not the Sharpest tool in the box
Another dreary cold and damp day. MK2 into town first thing though.
I did not leave the lights on either.
Mind you when I got back the windows were completely misted up.
PM I did manage an hour or so in the garage to see if any of the bolts/machine screws I had bought fitted.
Mixed results. Out of the four items I bought one was too short, one was UNC not UNF and the bonnet bolts were just way too small – although I suspect the captive nuts are missing.
My one success was the machine screws for the door caps.
Although one captive nut was missing on the drivers side.
Sorted For E’s and Whizz
Dark dank day. So work at home first then off to the E-type lunch – in the MK7 of course. Did park next to a drug dealers car though so we were sorted for Whizz.
The run back was slow as A14 seemed very busy for a Thursday evening but we did pick up the 4mm glass for the Talbot.





























