It’s Insanity

Uncategorized

“Insanity is doing the same thing over and over again and expecting different results”. See below:

We’ll come back to that though.

We started the day visiting the boat in the MK7 with the GTs – we were looking after then as Oli had to get his eye looked at – at the Heath. I spotted that yellow MG again when we arrived and showed it to Monty while Jana took EB down to the boat.

They both enjoyed the boat, although they were a bit wary of it – probably without Mummy and Daddy there to support them.

While we were messing about Oli rang and told us he was not supposed to drive for 4 hours – we decided to collect him and his car a bit later. So after dropping the GTs off we headed to pick him up and I drove the Passat back. 

After lunch I decided to look at the Alpine flashers again. That’s where the madness started. Each unit worked for a while and then I managed to blow two fiddling.

I worked out what I was doing wrong though so after careful rewriting with #3 I got the result I wanted – we had flashing indicators. Well one mind you, as three out of four bulbs don’t actually flash – but it is progress. It also appeared to have no power to the flasher terminal itself but as I had to retire everything anyway I did not think there was a problem just running a new live in.

So after everything replicated as before I managed to blow the final unit. It flashed about 10 times and then gave up.

So did I.

Small Welcome

Uncategorized

Back from the Deben and greeted by a smart but small MGB GT.

It did look very small next to what passes for ‘cars’ nowadays. Nice period colour though.

Oh and my new flasher switch had arrived when we got back.

IT IS THE BLOODY SAME AS BOTH THE OTHERS !

Barnard 1 – Brazill 0

Uncategorized

PM I decided to potter with the Alpine.

To start with I made a bypass wire with my new tool to see if the ammeter was the problem. Before I could even use it I spotted the problem. The wire had come off the back of the ammeter – again. Odd.

But at least it was quick to fix. So I started on the flasher unit. No luck even with the re-wired contacts. So I decided to pop into town to get a replacement one. Halfords – no – but Wilco had one. I checked it was negative earth [it was] and came back feeling confident until I hit stationary traffic on the A14.

However that cleared soon and I was home unpacking the unit. Only to find it was exactly the same as the one I had already – Positive Earth instructions inside included. Oh well.

Another duel polarity one is on the way for next weeks attempt. 

Two Jobs – Two Fails – and a Ford Alpine

Uncategorized

PM I thought I’d get back into the cars so decided to start with the Imp shims. I undid the U bolts and lifted the car up. 

On both sides. It still would not come apart. Am I doing something wrong ?

That cleared away I decided to do the Alpine indicator. I put in the new one and no power to anything – odd. I checked the fuse and we were fine. So I tried the ignition and yes it was working again.
I made a cross over wire with my new super-tool (it really does work) and tried again. No ignition – at all ! This is where we were some time at Lee’s too. So I know we’ll overcome it, but I decided to do a ‘Barnard’ – it was John Barnard the F1 designed/engineer that said he stopped work and tried again another day when it looked impossible. So I did.
No Alpine to the RGEA then – and it rained hard anyway – and that our lucky starts we got to Glemham and back. Off I went in the SAAB and there was a Humber Super Snipe and an Alpine … with a Ford Zetec engine.

Oh well I thought at least it goes – unlike mine.

Slow car day

Uncategorized

Admin and other paperwork catching up on the last few days – although the SAAB got a run to save the planet. Oh and I bought another bit for the Alpine.

Miles wise – a belated check confirmed my thoughts. The Talbot cruised in to pole position with 460 miles – closely followed by the E-type on 287 after the 11th hour dash on the 31st.

Add in the SAAB 600+ [camping etc.] and take away James in the MK2 to Aldbrough and I’ve done just over 1500 miles this month.

As to pics – going though the Hampton Court ones threw up an old favorite. A 1960 Aston Martin DB4 GT Zagato Coupe.

OK it’s not the exact car but similar.

Alpine Time to Shine

Uncategorized

So the final day of the frenetic activity of the last few weeks came to a happy ending, with the Alpine home after running well to and from Glemham – less clonks and bangs too after I had screwed things down in the engine bay on Thursday.

We’d started out early for Glemham and the traffic was light all the way to the entrance. Joining the cars already on the RGEA stand we swung in next to a Tiger and there we were – mission accomplished – we were at the show !

After a bit of banter about the colour [I definitely still see it as a slightly orange red] we settled down to car chat and wandering around. The show was a bit better organised and laid out this year.

So which red is which ?

Finally we left about 4:00 and drove out with the minimum of fuss. The car enjoyed the run back – although slow running is still a bit lumpy – but even the heavy traffic across the bridge was shrugged off. One odd things was that the temperature gauge seemed to go up and down rapidly – another electrical gremlin I think.

So ‘That’s All Folks’, well for now at least and I can leave the cars alone.

Oh but I mention the Ferrari is probably going to be ready next week ?

Showers, Shims and Gauge Shenanigans

Uncategorized

5:00 am start for me and Mr. E today as we’re off to the Hampton Court Concours. Third time down there but not since 2019.

I took a different route and arrived about two and a half hours later. The E-type running well and with the exception of the ammeter [and now the fuel gauge] it gave me no concerns. 

Of course it rained – slightly at first and then heavily twice more on the way. It was even raining as James and I met up in the holding area after I’d slogged my way through the early morning Kingston traffic. Wax did its job though and it hardly looked dirty.
Quite cool and cloudy during the day but lots of interesting cars. We got a sneak peek at an Aston Martin Valkyrie – complete with gravel in the ducts – before the crowds turned up.

There was also the five Bentley’s there that had featured in Octane so I had a good look at the Sports Coupe that looked a bit like TAS – it was huge though – much bigger in all dimensions and with a dark roof looks less svelte too.

Passing a company setting ‘investment products’ in cars James spotted a close replica of part of my collection. A Ferrari (well a 328) an Aston Martin V12 Vantage and an E-type FHC. 

The chap said that V12 Vantages were going up again – but I’m not sure – and the E-type is going down – but the Ferrari probably has some more headroom.
We also spotted a vintage car showing its shims – which excited me ! It was a 1922 Ballot 2 LS – a race car in its day with a 4-cylinder, twin-overhead-cam 1944cc engine. But it was the shims that got the picture.

It amused/bemused the owners wife who was standing by the car too – so I explained what they were and why I was happy to see them.

About 4:00 we’d had enough but were told we might have to stay until 6:00, but we pottered down the grass/service road and then out between the crowds and no one seemed to mind. I dropped James at the station, set the sat nav on the phone and went off. The route to the A3 seemed different – so different it took me directly to the M25. In the slow parts the charging did not seem to keep up with the fan draw – oh and the petrol gauge just hovered around the quarter to the half mark all the time.
The M25 was lumpy bumpy and noisy – but we sped along it – charging all the way until Junction 2 to 1a. Stop-start traffic and slow running had me a bit worried but we got over the bridge and away OK again. 
So what about fuel ? Well I thought we’d done 250+ miles before, so I decided to go for it and see what the gauge did ? Around Colchester it seemed to start working [well it went under the quarter mark at last] so I kept going. 
I got home as the daylight went but home at last – safe and sound around 7:00 pm.
Just shy of 240 miles and still petrol showing on the gauge – I’ll keep running it and see what happens.

Double Clean

Uncategorized

E-Type’s turn first thing for a wash and brush up.

I gave it for full works as well as a thick layer of polish.

So much so when I had put it away in the garage I could smell the polish. I did the roof three times as it is not as good as the bonnet – mind you it’s not been re-sprayed three times. Overall it came up well.

After that we swapped it for the Alpine.

Which looked quite good before I had washed it. I did the wheels and blacked the tyres but not sure it added much. After a good wash I tinkered again for a few hours while I waited for the flasher unit to arrive. I added a thicker rubber under one side of the boot hinge and completed the poppers for the boot divider. I then thought I’d tackle the window felts.
The first one took about an hour – complete with dropping three clips into the void and taking the panel off yet again. By opening the clips a bit I managed to get them to fit eventually.
The second one only took ten minutes as I opened each clip before I started.

I also looked at how to fit the outer rubber but that defeated me. As I finished the part turned up. It did not work – in fact it rattled when I took it out of the box. Bugger. But at least I did a job I was not expecting to be so ‘easy’.

Badge Engineering

Uncategorized

AM Alpine work again. This time I started with bleeding the brakes – which seemed fine ?

Then I screwed in the new flasher relay and the water spray pump.

I think I might get a replacement Lucas flasher unit though. Then I also re-aligned the drivers door and fitted smaller rubber seal that I had in stock. It fitted much better but the broken fitting needs replacing.

I then tried to fix the bonnet catch. It had no captive huts to screw into sit foxed me really. I managed to get it to catch one side and got the bonnet to stay down (and come back up) but it’s not correct. I finished by changing the fan switch.

Then Harkstead in the MK7 and back.
I then looked at the Alpine and decided to do the badges to save time tomorrow. 

Some were bent with broken pins and others did not want to fit so I stuck them all down with clear sealant.

It looks better, although I need to give it a clean and there are lots and lots of jobs still to do.

I then took the E-type out to get petrol. 

Lots of red in the background now again I noticed. It took 40+ litres but the fuel gauge hardly moved unlike the ammeter.
The fuel gauge has done this before, but I’ll have to watch it with the long run on Saturday.