Aston out Again
Checked the Aston oil first thing – just a tiny bit down but nothing to worry about. Can you spot it ?
A couple of mm from the top.
Checked the Aston oil first thing – just a tiny bit down but nothing to worry about. Can you spot it ?
A couple of mm from the top.
I dropped the MK2 off first thing at The Corner Garage for the work. Looked good in the morning sun.
Then I went to book in. Having checked last night he was ready for me it was disappointing to find that the garage had not ordered any of the parts – so I have their ratty loan car for a few days.
Mind you what I don’t need is another car at the moment. Next I took the MK7 to the chandlers to buy fittings and then to the boat to fit them. Nope the screws did not fit the hole – I had sort of expected it though. Actually it turned out one fitting was fine – so I thought I’d ‘just’ sand the other a bit.
After a bit of dithering I decided to take the Talbot to the small Cars and Coffee meet at Needham Market first thing. As before someone stopped to let me out of the drive which feels odd. The run up was fine and I found myself doing 70 on the A14 past the lories, but throttled back a bit. Good choice I thought as it was a bit longer than I thought and a bit chilly in the early Autumn air.
I parked next to a 1960 Bentley (I thought it was age/class appropriate) but he quickly left soon to be replaced by a youngish chap in a Hi-Boy – based on a 1932 Ford. DVLA say a 1932 Ford B Roadster. Shame it was on a Q plate which sort of spoiled the illusion.
I’d forgotten any cash so no coffee (or bacon roll) but there were people I knew to talk to and a few interesting cars. I noticed a Charger (General Lee clone) and chatted to the owner after I found out he who knew a certain other Martin – of course he did.
I told a friend that I’d probably not get into American cars – only to spot this which looked much better in the flesh.
Its a 1938 Ford Tudor V8 when original but now with a 1956 265 Chevy V8 and other mods.
I’d quickly printed the QR code for the Imp before I left but it turned out it had got mixed up with the Talbot one which confused a chap with an Alfa.
It was the turn of the Talbot for a clean first thing. Quick check of the oil (none needed) and water (probably but left it as it was).
Soon it was looking much better. I even took the spare wheel off to clean under that.
But something was still letting it down. The bloody wheels were still filthy. So they got a special clean.
I started the day scanning in a few of the photos Sophy had given me. Some I had seen before I realised but others were interesting. The car really did have a bit of a life.
Then it was car cleaning time. First the E-type – after the Hampton Court Concourse it was a bit dusty but not too bad. I check the Oil (none needed) and water – a little. Then cleaned the car.
I think this is a ‘after’ shot but who knows. Then the MK2 got spruce up ahead of the work next week. That done and lunch over it was just about time to drop Jana at the station – so I took the clean Golf.
It really needs a clean too – so tomorrow it might just get one.
I started by sorting out the jumble of wires and put the cars on charge – Alpine and Golf – to top up the batteries.
Then I tried to flatten the gravel in the other car port where I’m going to have to park the Aston.
Then found a truck blocking the road – delivering wood.
I thought I’d take the Talbot out as it was sunny this morning. She started fine so off too Shotley Marina we went to drop something off. I got a few looks driving in from the chaps who work there – but they are probably used to it.
Obviously I could not resist a picture as well. Actually several – but the sun was very bright.
I did notice the steering is quite hard going around corners and it feel like the car is scrubbing the front tyres. I must remember it is 91 years old too. Re-calibrate.
In the afternoon I took the Imp out (before the rain came) and noticed that has very direct quick steering. I also ‘drove through’ the wheel wobble – e.g. just sped up not slowed down. It was much better.
Around the block we wizzed and it seemed to like the cooler air too – it is much more bumpy than the Talbot though.
Yep – I’d left the LED torch under the dash all night. Dho !
After doing a Web page for Chris’s Rapier I thought I’d better get on with the real work so I started by warming the Talbot on the fan heater for an hour while I got the Alpine letters replaced.
However I found the alpine sitting in a pool is water from the rain getting into the bubble. So that cleaning out again. The car was hard to start but it started – eventually – it’s gone quite cold as Autumn has arrived.
Then as I backed out the dials failed – that’s another electrical gremlin. I suspect the whole loom needs replacing. Then I got a message from Roberto – the Ferrari is ready – oh no.
Back to the Alpine. Testing showed no power through the secondary (top) fuse. A bit of a tinker, a replacement 50 amp fuse and we’re back in business.
So now for the job I was going to do. The letters came off ok but the new ones are not quite the same – not that you will notice. The fishing wire under them worked too.
Although it took a bit longer than I had hoped it was all done by 11:45 and I could try and start the Talbot.
I used the process I had planned. Prime carb a few times until you can hear fuel in it (well a noise anyway). Turn over to raise oil pressure – three times. Put on the hand throttle. Try getting oil pressure again. Finally pump the pedal a few times and she started to catch, a bit more pumping some hesitation with the odd knocking noises and then she caught.
I noticed the ignition light was not on at 800 rpm but it is at 600. Glad to see no smoke from the exhaust when I backed out and only limited oil on the floor. All three god points.
I ran a short while to warn it up on the drive and then the rain came – so back into the garage we went.
I got a bit carried away after lunch and decided to look at the Alpine indicators. All in all quite frustrating and some times I just went backwards as things failed which had been working before. I ended up taking the indicator switch off and then taking it apart – finding some of the parts are quite small.
This tiny spring pushes a copper bar onto the contacts. It was very greasy so I cleaned it – in hindsight probably it was supposed to be lubricated… It seemed to get more dismantled as I went but I kept going.
I decided to go out and get a few replacement flasher units so off we went in the SAAB into the gloom.